HP A6600 Configuration Manual page 73

Configure a static multicast route
5.
# On Router C, configure a static multicast route and specify its RPF neighbor leading toward Source is
Tunnel 0 on Router A.
[RouterC] ip rpf-route-static 10.1.1.0 24 50.1.1.1
Verify the configuration
6.
Source sends multicast data to the multicast group 225.1.1.1 and Receiver can receive the multicast data
after joining the multicast group. You can view the PIM routing table information on routers using display
pim routing-table. For example:
# View the PIM routing table information on Router C.
[RouterC] display pim routing-table
VPN-Instance: public net
Total 1 (*, G) entry; 1 (S, G) entry
(*, 225.1.1.1)
Protocol: pim-dm, Flag: WC
UpTime: 00:04:25
Upstream interface: NULL
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 1
1: GigabitEthernet1/0/1
Protocol: igmp, UpTime: 00:04:25, Expires: never
(10.1.1.100, 225.1.1.1)
Protocol: pim-dm, Flag: ACT
UpTime: 00:06:14
Upstream interface: Tunnel0
Upstream neighbor: 50.1.1.1
RPF prime neighbor: 50.1.1.1
Downstream interface(s) information:
Total number of downstreams: 1
1: GigabitEthernet1/0/1
Protocol: pim-dm, UpTime: 00:04:25, Expires: never
The output shows that Router A is the RPF neighbor of Router C and the multicast data from Router A is
delivered over a GRE tunnel to Router C.
62