HP A6600 Configuration Manual page 197

# Configure an MSDP peer on Loopback 0 of Router B.
[RouterB] msdp
[RouterB-msdp] originating-rp loopback 0
[RouterB-msdp] peer 2.2.2.2 connect-interface loopback 0
[RouterB-msdp] quit
# Configure an MSDP peer on Loopback 0 of Router D.
[RouterD] msdp
[RouterD-msdp] originating-rp loopback 0
[RouterD-msdp] peer 1.1.1.1 connect-interface loopback 0
[RouterD-msdp] quit
Verify the configuration
5.
You can use display msdp brief to view the brief information of MSDP peering relationships between the
routers.
# View the brief MSDP peer information on Router B.
[RouterB] display msdp brief
MSDP Peer Brief Information of VPN-Instance: public net
Configured Up
1 1
Peer's Address
2.2.2.2
# View the brief MSDP peer information on Router D.
[RouterD] display msdp brief
MSDP Peer Brief Information of VPN-Instance: public net
Configured Up
1 1
Peer's Address
1.1.1.1
To view the PIM routing information on each router, use display pim routing-table.
When Source 1 (10.110.5.100/24) sends multicast data to multicast group G (225.1.1.1), Host A joins
multicast group G. By comparing the PIM routing information displayed on Router B with that displayed
on Router D, you can see that Router B acts now as the RP for Source 1 and Host A.
# View the PIM routing information on Router B.
[RouterB] display pim routing-table
VPN-Instance: public net
Total 1 (*, G) entry; 1 (S, G) entry
(*, 225.1.1.1)
RP: 10.1.1.1 (local)
Protocol: pim-sm, Flag: WC
UpTime: 00:15:04
Upstream interface: Register
Upstream neighbor: NULL
RPF prime neighbor: NULL
Listen
0
State Up/Down time
Up 00:10:17
Listen
0
State Up/Down time
Up 00:10:18
186
Connect Shutdown
0 0
AS SA Count
? 0
Connect Shutdown
0 0
AS SA Count
? 0
Down
0
Reset Count
0
Down
0
Reset Count
0