HP A6600 Configuration Manual page 247
Ip multicast
Hide thumbs
Also See for A6600:
- Configuration manual (501 pages) ,
- Getting started (222 pages) ,
- Limited warranty (41 pages)
Table of Contents
Advertisement
Procedure
Configure PE 1
1.
# Configure a Router ID, enable IP multicast routingon the public network, configure an MPLS LSR ID, and
enable the LDP capability.
<PE1> system-view
[PE1] router id 1.1.1.1
[PE1] multicast routing-enable
[PE1] mpls lsr-id 1.1.1.1
[PE1] mpls
[PE1-mpls] quit
[PE1] mpls ldp
[PE1-mpls-ldp] quit
# Create VPN instance a, configure an RD for it, and create an ingress route and an egress route for it.
[PE1] ip vpn-instance a
[PE1-vpn-instance-a] route-distinguisher 100:1
[PE1-vpn-instance-a] vpn-target 100:1 export-extcommunity
[PE1-vpn-instance-a] vpn-target 100:1 import-extcommunity
# Enable IP multicast routing in VPN instance a, configure a share-group address, associate an MTI with
the VPN instance, and define the switch-group-pool address range.
[PE1-vpn-instance-a] multicast routing-enable
[PE1-vpn-instance-a] multicast-domain share-group 239.1.1.1 binding mtunnel 0
[PE1-vpn-instance-a] multicast-domain switch-group-pool 225.2.2.0 28
[PE1-vpn-instance-a] quit
# Configure an IP address, and enable PIM-SM and LDP capability on the public network interface
GigabitEthernet 1/0/1.
[PE1] interface GigabitEthernet 1/0/1
[PE1-GigabitEthernet1/0/1] ip address 192.168.6.1 24
[PE1-GigabitEthernet1/0/1] pim sm
[PE1-GigabitEthernet1/0/1] mpls
[PE1-GigabitEthernet1/0/1] mpls ldp
[PE1-GigabitEthernet1/0/1] quit
# Bind GigabitEthernet 1/0/2 with VPN instance a, configure an IP address and enable IGMP and
PIM-SM on the interface.
[PE1] interface GigabitEthernet 1/0/2
[PE1-GigabitEthernet1/0/2] ip binding vpn-instance a
[PE1-GigabitEthernet1/0/2] ip address 10.110.1.1 24
[PE1-GigabitEthernet1/0/2] igmp enable
[PE1-GigabitEthernet1/0/2] pim sm
[PE1-GigabitEthernet1/0/2] quit
# Bind GigabitEthernet 1/0/3 with VPN instance a, configure an IP address and enable PIM-SM on the
interface.
[PE1] interface GigabitEthernet 1/0/3
[PE1-GigabitEthernet1/0/3] ip binding vpn-instance a
[PE1-GigabitEthernet1/0/3] ip address 10.110.2.1 24
[PE1-GigabitEthernet1/0/3] pim sm
[PE1-GigabitEthernet1/0/3] quit
236
Advertisement
Table of Contents
Troubleshooting
