HP A6600 Configuration Manual page 396

Configure the position of C-BSR and C-RP.
4.
# Configure the position of C-BSR and C-RP on Router A.
[RouterA] pim ipv6
[RouterA-pim6] c-bsr 1001::1
[RouterA-pim6] c-rp 1001::1
[RouterA-pim6] quit
# Configure the position of C-BSR and C-RP on Router B.
[RouterB] pim ipv6
[RouterB-pim6] c-bsr 1001::2
[RouterB-pim6] c-rp 1001::2
[RouterB-pim6] quit
Configure BGP, and specify the IPv6 MBGP peer.
5.
# On Router A, configure the IPv6 MBGP peer.
[RouterA] ipv6
[RouterA] bgp 100
[RouterA-bgp] router-id 1.1.1.1
[RouterA-bgp] ipv6-family
[RouterA-bgp-af-ipv6] peer 1001::2 as-number 200
[RouterA-bgp-af-ipv6] import-route direct
[RouterA-bgp-af-ipv6] quit
[RouterA-bgp] ipv6-family multicast
[RouterA-bgp-af-ipv6-mul] peer 1001::2 enable
[RouterA-bgp-af-ipv6-mul] import-route direct
[RouterA-bgp-af-ipv6-mul] quit
[RouterA-bgp] quit
# On Router B, configure the IPv6 MBGP peers and redistribute OSPF routes.
[RouterB] ipv6
[RouterB] bgp 200
[RouterB-bgp] router-id 2.2.2.2
[RouterB-bgp] ipv6-family
[RouterB-bgp-af-ipv6] peer 1001::1 as-number 100
[RouterB-bgp-af-ipv6] import-route ospfv3 1
[RouterB-bgp-af-ipv6] quit
[RouterB-bgp] ipv6-family multicast
[RouterB-bgp-af-ipv6-mul] peer 1001::1 enable
[RouterB-bgp-af-ipv6-mul] import-route ospfv3 1
[RouterB-bgp-af-ipv6-mul] quit
[RouterB-bgp] quit
Verify the configuration
6.
You can use display bgp ipv6 multicast peer to display IPv6 MBGP peers on each router. For example,
display IPv6 MBGP peers on Router B.
[RouterB] display bgp ipv6 multicast peer
BGP local router ID : 2.2.2.2
Local AS number : 200
Total number of peers : 3 Peers in established state : 3
385