HP A6600 Configuration Manual page 44

[RouterA-Ethernet1/2] pim dm
[RouterA-Ethernet1/2] quit
Configure Router B
3.
# Enable IGMP snooping globally.
<RouterB> system-view
[RouterB] igmp-snooping
[RouterB-igmp-snooping] quit
# Create VLAN 100, assign GigabitEthernet 1/0/1 through GigabitEthernet 1/0/4 to this VLAN, and
enable IGMP snooping and the function of dropping unknown multicast traffic in the VLAN.
[RouterB] vlan 100
[RouterB-vlan100] port GigabitEthernet 1/0/1 to GigabitEthernet 1/0/4
[RouterB-vlan100] igmp-snooping enable
[RouterB-vlan100] igmp-snooping drop-unknown
[RouterB-vlan100] quit
# Configure a multicast group filter so that the hosts in VLAN 100 can join only the multicast group
224.1.1.1.
[RouterB] acl number 2001
[RouterB-acl-basic-2001] rule permit source 224.1.1.1 0
[RouterB-acl-basic-2001] quit
[RouterB] igmp-snooping
[RouterB-igmp-snooping] group-policy 2001 vlan 100
[RouterB-igmp-snooping] quit
# Configure GigabitEthernet 1/0/3 and GigabitEthernet 1/0/4 as simulated hosts for multicast group
224.1.1.1.
[RouterB] interface GigabitEthernet 1/0/3
[RouterB-GigabitEthernet1/0/3] igmp-snooping host-join 224.1.1.1 vlan 100
[RouterB-GigabitEthernet1/0/3] quit
[RouterB] interface GigabitEthernet 1/0/4
[RouterB-GigabitEthernet1/0/4] igmp-snooping host-join 224.1.1.1 vlan 100
[RouterB-GigabitEthernet1/0/4] quit
Verify the configuration
4.
# Display the detailed IGMP snooping groups information in VLAN 100 on Router B.
[RouterB] display igmp-snooping group vlan 100 verbose
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Port flags: D-Dynamic port, S-Static port, C-Copy port
Subvlan flags: R-Real VLAN, C-Copy VLAN
Vlan(id):100.
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Router port(s):total 1 port.
GE1/0/1
IP group(s):the following ip group(s) match to one mac group.
(D) ( 00:01:30 )
33