HP A6600 Configuration Manual page 95

[RouterB] multicast routing-enable
[RouterB] interface GigabitEthernet 1/0/1
[RouterB-GigabitEthernet1/0/1] igmp enable
[RouterB-GigabitEthernet1/0/1] pim dm
[RouterB-GigabitEthernet1/0/1] quit
[RouterB] interface GigabitEthernet 0/0/0
[RouterB-GigabitEthernet0/0/0] pim dm
[RouterB-GigabitEthernet0/0/0] quit
# Enable IP multicast routing on Router C, enable PIM-DM on each interface, and enable IGMP on
GigabitEthernet 1/0/1.
<RouterC> system-view
[RouterC] multicast routing-enable
[RouterC] interface GigabitEthernet 1/0/1
[RouterC-GigabitEthernet1/0/1] igmp enable
[RouterC-GigabitEthernet1/0/1] pim dm
[RouterC-GigabitEthernet1/0/1] quit
[RouterC] interface GigabitEthernet 0/0/0
[RouterC-GigabitEthernet0/0/0] pim dm
[RouterC-GigabitEthernet0/0/0] quit
Configure a multicast group filter
3.
# Configure a multicast group filter on Router A, so that the hosts connected to GigabitEthernet 1/0/1
can join only multicast group 224.1.1.1.
[RouterA] acl number 2001
[RouterA-acl-basic-2001] rule permit source 224.1.1.1 0
[RouterA-acl-basic-2001] quit
[RouterA] interface GigabitEthernet 1/0/1
[RouterA-GigabitEthernet1/0/1] igmp group-policy 2001
[RouterA-GigabitEthernet1/0/1] quit
Verify the configuration
4.
Use display igmp interface to view the IGMP configuration and operation status on each router interface.
For example:
# Display IGMP information on GigabitEthernet 1/0/1 of Router B.
[RouterB] display igmp interface GigabitEthernet 1/0/1
GigabitEthernet1/0/1(10.110.2.1):
IGMP is enabled
Current IGMP version is 2
Value of query interval for IGMP(in seconds): 60
Value of other querier present interval for IGMP(in seconds): 125
Value of maximum query response time for IGMP(in seconds): 10
Querier for IGMP: 10.110.2.1 (this router)
Total 1 IGMP Group reported
84