Configuring Join/Prune Message Sizes; Displaying And Maintaining Ipv6 Pim - HP A6600 Configuration Manual

To do...
2. Enter interface view.
3. Configure the hello interval.
4. Configure the maximum delay
between hello messages.
5. Configure the join/prune
interval.
6. Configure the join/prune
timeout time.
7. Configure assert timeout time.

Configuring join/prune message sizes

A larger join/prune message size will result in loss of a larger amount of information when a message is
lost; with a reduced join/message size, the loss of a single message will bring relatively minor impact.
By controlling the maximum number of (S, G) entries in a join/prune message, you can effectively reduce
the number of (S, G) entries sent per unit of time.
To do...
1. Enter system view.
2. Enter IPv6 PIM view.
3. Configure the maximum size
of a join/prune message.
4. Configure the maximum
number of (S, G) entries in a
join/prune message.

Displaying and maintaining IPv6 PIM

To do...
View the BSR information in the
IPv6 PIM-SM domain and locally
configured C-RP information in
effect.
View the information of IPv6
unicast routes used by IPv6 PIM.
Use the command...
interface interface-type
interface-number
pim ipv6 timer hello interval
pim ipv6 triggered-hello-delay
interval
pim ipv6 timer join-prune interval
pim ipv6 holdtime join-prune
interval
pim ipv6 holdtime assert interval
Use the command...
system-view
pim ipv6
jp-pkt-size packet-size
jp-queue-size queue-size
Use the command...
display pim ipv6 bsr-info [ | { begin | exclude |
include } regular-expression ]
display pim ipv6 claimed-route
[ ipv6-source-address ] [ | { begin | exclude |
include } regular-expression ]
337
Remarks
—
Optional.
30 seconds by default.
Optional.
5 seconds by default.
Optional.
60 seconds by default.
Optional.
210 seconds by default.
Optional.
180 seconds by default.
Remarks
—
—
Optional.
8,100 bytes by default.
Optional.
1,020 by default.
Remarks
Available in
any view.
Available in
any view.