Task
Reset IPv6 BGP
connections.
Clearing IPv6 BGP information
Task
Clear dampened IPv6 BGP routing
information and release suppressed
routes.
Clear IPv6 BGP route flap information.
IPv6 BGP configuration examples
Some examples for IPv6 BGP configuration are similar to those of BGP4. For more information, see
"Configuring BGP."
IPv6 BGP basic configuration example
Network requirements
All switches in
B, Switch C, and Switch D are fully meshed through IBGP connections.
Figure 116 Network diagram
Configuration procedure
Configure IPv6 addresses for interfaces. (Details not shown.)
1.
Configure IBGP connections:
2.
# Configure Switch B.
<SwitchB> system-view
Command
reset bgp ipv6 { as-number | ipv4-address | ipv6-address | all |
external | group group-name | internal }
Figure 1 16
run IPv6 BGP. Between Switch A and Switch B is an EBGP connection. Switch
Command
reset bgp ipv6 dampening [ ipv6-address
prefix-length ]
reset bgp ipv6 flap-info
[ ipv6-address/prefix-length | as-path-acl
as-path-acl-number | regexp as-path-regexp ]
reset bgp ipv6 peer-ipv6-address flap-info
345
Remarks
Available in
user view
Remarks
Available in
user view
Available in
user view