HP A6600 Configuration Manual page 188

[RouterA] multicast routing-enable
[RouterA] interface GigabitEthernet 1/0/1
[RouterA-GigabitEthernet1/0/1] pim sm
[RouterA-GigabitEthernet1/0/1] quit
[RouterA] interface GigabitEthernet 1/0/2
[RouterA-GigabitEthernet1/0/2] pim sm
[RouterA-GigabitEthernet1/0/2] quit
[RouterA] interface GigabitEthernet 1/0/3
[RouterA-GigabitEthernet1/0/3] igmp enable
[RouterA-GigabitEthernet1/0/3] pim sm
[RouterA-GigabitEthernet1/0/3] quit
The configuration on Router B, Router C, Router D, Router E, and Router F is similar to the configuration
on Router A.
# Configure a PIM domain border on Router B.
[RouterB] interface pos 5/0/0
[RouterB-Pos5/0/0] pim bsr-boundary
[RouterB-Pos5/0/0] quit
The configuration on Router C and Router E is similar to the configuration on Router B.
Configure C-BSRs and C-RPs
3.
# Configure Loopback 0 as a C-BSR and a C-RP on Router B.
[RouterB] pim
[RouterB-pim] c-bsr loopback 0
[RouterB-pim] c-rp loopback 0
[RouterB-pim] quit
The configuration on Router C and Router E is similar to the configuration on Router B.
Configure BGP and configure mutual route redistribution between BGP and OSPF
4.
# Configure EBGP on Router B, and redistribute OSPF routes.
[RouterB] bgp 100
[RouterB-bgp] router-id 1.1.1.1
[RouterB-bgp] peer 192.168.1.2 as-number 200
[RouterB-bgp] import-route ospf 1
[RouterB-bgp] quit
# Configure IBGP and EBGP on Router C, and redistribute OSPF routes.
[RouterC] bgp 200
[RouterC-bgp] router-id 2.2.2.2
[RouterC-bgp] peer 192.168.1.1 as-number 100
[RouterC-bgp] peer 192.168.3.2 as-number 200
[RouterC-bgp] import-route ospf 1
[RouterC-bgp] quit
# Configure IBGP on Router E, and redistribute OSPF routes.
[RouterE] bgp 200
[RouterE-bgp] router-id 3.3.3.3
[RouterE-bgp] peer 192.168.3.1 as-number 200
[RouterE-bgp] import-route ospf 1
[RouterE-bgp] quit
177