HP A6600 Configuration Manual page 303

Enable IPv6 multicast routing, enable IPv6 PIM-SM on each interface and enable MLD and MLD
2.
SSM mapping on the host-side interface.
# Enable IPv6 multicast routing on Router D, enable IPv6 PIM-SM on each interface and enable MLD
(version 2) and MLD SSM mapping on GigabitEthernet 1/0/1.
<RouterD> system-view
[RouterD] multicast ipv6 routing-enable
[RouterD] interface GigabitEthernet 1/0/1
[RouterD-GigabitEthernet1/0/1] mld enable
[RouterD-GigabitEthernet1/0/1] mld version 2
[RouterD-GigabitEthernet1/0/1] mld ssm-mapping enable
[RouterD-GigabitEthernet1/0/1] pim ipv6 sm
[RouterD-GigabitEthernet1/0/1] quit
[RouterD] interface GigabitEthernet 1/0/2
[RouterD-GigabitEthernet1/0/2] pim ipv6 sm
[RouterD-GigabitEthernet1/0/2] quit
[RouterD] interface GigabitEthernet 1/0/3
[RouterD-GigabitEthernet1/0/3] pim ipv6 sm
[RouterD-GigabitEthernet1/0/3] quit
# Enable IPv6 multicast routing on Router A, and enable IPv6 PIM-SM on each interface.
<RouterA> system-view
[RouterA] multicast ipv6 routing-enable
[RouterA] interface GigabitEthernet 1/0/1
[RouterA-GigabitEthernet1/0/1] pim ipv6 sm
[RouterA-GigabitEthernet1/0/1] quit
[RouterA] interface GigabitEthernet 1/0/2
[RouterA-GigabitEthernet1/0/2] pim ipv6 sm
[RouterA-GigabitEthernet1/0/2] quit
[RouterA] interface GigabitEthernet 1/0/3
[RouterA-GigabitEthernet1/0/3] pim ipv6 sm
[RouterA-GigabitEthernet1/0/3] quit
The configuration on Router B and Router C is similar to that on Router A.
Configure a C-BSR and a C-RP
3.
# Configure C-BSR and C-RP interfaces on Router D.
[RouterD] pim ipv6
[RouterD-pim6] c-bsr 1003::2
[RouterD-pim6] c-rp 1003::2
[RouterD-pim6] quit
Configure the IPv6 SSM group range
4.
# Configure the IPv6 SSM group range FF3E::/64 on Router D.
[RouterD] acl ipv6 number 2000
[RouterD-acl6-basic-2000] rule permit source ff3e:: 64
[RouterD-acl6-basic-2000] quit
[RouterD] pim ipv6
[RouterD-pim6] ssm-policy 2000
[RouterD-pim6] quit
The configuration on Router A, Router B and Router C is similar to that on Router D.
292