Configuring The Prune Delay - HP A6600 Configuration Manual

To do...
3. Configure the priority for DR
election.
4. Configure IPv6 PIM neighbor
timeout time.
5. Configure the prune message
delay time (LAN-delay).
6. Configure the prune override
interval.
7. Disable join suppression.
Configuring hello options on an interface
To do...
1. Enter system view.
2. Enter interface view.
3. Configure the priority for DR
election.
4. Configure IPv6 PIM neighbor
timeout time.
5. Configure the prune message
delay time (LAN-delay).
6. Configure the prune override
interval.
7. Disable join suppression.
8. Configure the interface to
reject hello messages without
a generation ID.

Configuring the prune delay

If a downstream router on a multi-access LAN does not support the prune override interval option, you
can configure the prune delay time on the upstream router so that it will not perform the prune action
immediately after receiving the prune message. Instead, it maintains the current forwarding state for a
period of prune delay time. In this period, if the upstream router receives a join message from the
downstream router, it cancels the prune action.
To do...
1. Enter system view.
2. Enter IPv6 PIM view.
Use the command...
hello-option dr-priority priority
hello-option holdtime interval
hello-option lan-delay interval
hello-option override-interval
interval
hello-option neighbor-tracking
Use the command...
system-view
interface interface-type
interface-number
pim ipv6 hello-option dr-priority
priority
pim ipv6 hello-option holdtime
interval
pim ipv6 hello-option lan-delay
interval
pim ipv6 hello-option
override-interval interval
pim ipv6 hello-option
neighbor-tracking
pim ipv6 require-genid
Use the command...
system-view
pim ipv6
335
Remarks
Optional.
1 by default.
Optional.
105 seconds by default.
Optional.
500 milliseconds by default.
Optional.
2,500 milliseconds by default.
Required.
Enabled by default.
Remarks
—
—
Optional.
1 by default.
Optional.
105 seconds by default.
Optional.
500 milliseconds by default.
Optional.
2,500 milliseconds by default.
Required.
Enabled by default.
Required.
By default, hello messages without
Generation_ID are accepted.
Remarks
—
—