Mld Configuration Examples; Basic Mld Functions Configuration Example - HP A6600 Configuration Manual

To do...
Display information about the
hosts tracked by MLD on the
Layer 2 ports (on a distributed
device).
Display MLD configuration and
running information on the
specified interface or all
MLD-enabled interfaces.
Display the information of the
MLD proxying groups.
Display the information of the
MLD routing table.
Display MLD SSM mappings.
Display the IPv6 multicast group
information created based on the
configured MLD SSM mappings.
Display information about the
hosts that join based on the MLD
SSM mappings on an interface.
Remove the dynamic group
entries of a specified MLD group
or all MLD groups.
Remove the dynamic Layer 2 port
entries of a specified MLD group
or all MLD groups.
Clear MLD SSM mappings.
The reset mld group command cannot remove dynamic MLD group entries.
The reset mld group port-info command cannot remove the Layer 2 port entries of MLD groups.

MLD configuration examples

Basic MLD functions configuration example

Network requirements
As shown in
•
different organizations form stub networks N1 and N2, and Host A and Host C are multicast
receivers in N1 and N2 respectively.
Router A in the IPv6 PIM network connects to N1, and Router B and Router C connect to N2.
•
Use the command...
display mld host port-info vlan vlan-id group
ipv6-group-address [ source ipv6-source-address ] [ vlan
vlan-id ] [ slot slot-number ] [ | { begin | exclude |
include } regular-expression ]
display mld interface [ interface-type interface-number ]
[ verbose ] [ | { begin | exclude | include }
regular-expression ]
display mld proxying group [ group-address ] [ verbose ]
[ | { begin | exclude | include } regular-expression ]
display mld routing-table [ ipv6-source-address
[ prefix-length ] | ipv6-group-address [ prefix-length ] |
flags { act | suc } ] * [ | { begin | exclude | include }
regular-expression ]
display mld ssm-mapping ipv6-group-address [ | { begin
| exclude | include } regular-expression ]
display mld ssm-mapping group [ ipv6-group-address |
interface interface-type interface-number ] [ verbose ] [ |
{ begin | exclude | include } regular-expression ]
display mld ssm-mapping host interface interface-type
interface-number group ipv6-group-address source
ipv6-source-address [ | { begin | exclude | include }
regular-expression ]
reset mld group { all | interface interface-type
interface-number { all | ipv6-group-address
[ prefix-length ] [ ipv6-source-address [ prefix-length ] ] } }
reset mld group port-info { all | ipv6-group-address }
[ vlan vlan-id ]
reset mld ssm-mapping group { all | interface
interface-type interface-number { all | ipv6-group-address
[ prefix-length ] [ ipv6-source-address [ prefix-length ] ] } }
Figure 82, receivers receive VOD information in the multicast mode. Receivers of
288
Remarks
Available in
any view.
Available in
any view.
Available in
any view.
Available in
any view.
Available in
any view.
Available in
any view.
Available in
any view.
Available in
user view.
Available in
user view.
Available in
user view.