HP A6600 Configuration Manual page 351

<RouterA> system-view
[RouterA] multicast ipv6 routing-enable
[RouterA] interface GigabitEthernet 1/0/1
[RouterA-GigabitEthernet1/0/1] mld enable
[RouterA-GigabitEthernet1/0/1] pim ipv6 dm
[RouterA-GigabitEthernet1/0/1] quit
[RouterA] interface Serial 2/0/0
[RouterA-Serial2/0/0] pim ipv6 dm
[RouterA-Serial2/0/0] quit
The configuration on Router B and Router C is similar to that on Router A.
# On Router D, enable IPv6 multicast routing and enable IPv6 PIM-DM on each interface.
<RouterD> system-view
[RouterD] multicast ipv6 routing-enable
[RouterD] interface GigabitEthernet 1/0/1
[RouterD-GigabitEthernet1/0/1] pim ipv6 dm
[RouterD-GigabitEthernet1/0/1] quit
[RouterD] interface Serial 2/0/0
[RouterD-Serial2/0/0] pim ipv6 dm
[RouterD-Serial2/0/0] quit
[RouterD] interface pos 5/0/0
[RouterD-Pos5/0/0] pim ipv6 dm
[RouterD-Pos5/0/0] quit
[RouterD] interface pos 5/0/1
[RouterD-Pos5/0/1] pim ipv6 dm
[RouterD-Pos5/0/1] quit
Verify the configuration
3.
Carry out display pim ipv6 interface to view the IPv6 PIM configuration and running status on each
interface. For example:
# Verify the IPv6 PIM configuration information on Router D.
[RouterD] display pim ipv6 interface
Interface
GE1/0/1
Ser2/0/0
Pos5/0/0
Pos5/0/1
Carry out display pim ipv6 neighbor to view the IPv6 PIM neighboring relationships among the routers.
For example:
# Verify the IPv6 PIM neighboring relationships on Router D.
[RouterD] display pim ipv6 neighbor
Total Number of Neighbors = 3
Neighbor
NbrCnt HelloInt DR-Pri
0 30
0 30
1 30
1 30
Interface
340
DR-Address
1 4001::1
(local)
1 1002::2
(local)
1 2002::2
(local)
1 3001::2
(local)
Uptime Expires Dr-Priority