HP A6600 Configuration Manual page 355

Ip multicast
Hide thumbs Also See for A6600:
Table of Contents

Advertisement

[RouterA-GigabitEthernet1/0/1] pim ipv6 sm
[RouterA-GigabitEthernet1/0/1] quit
[RouterA] interface Serial 2/0/0
[RouterA-Serial2/0/0] pim ipv6 sm
[RouterA-Serial2/0/0] quit
[RouterA] interface pos 5/0/0
[RouterA-Pos5/0/0] pim ipv6 sm
[RouterA-Pos5/0/0] quit
The configuration on Router B and Router C is similar to that on Router A. The configuration on Router D
and Router E is also similar to that on Router A except that it is not necessary to enable MLD on the
corresponding interfaces on these two routers.
Configure C-BSRs and C-RPs
3.
# On Router D, configure the service scope of RP advertisements, specify a C-BSR and a C-RP, and set the
hash mask length to 128 and the priority of the C-BSR to 10.
<RouterD> system-view
[RouterD] acl ipv6 number 2005
[RouterD-acl6-basic-2005] rule permit source ff0e::101 64
[RouterD-acl6-basic-2005] quit
[RouterD] pim ipv6
[RouterD-pim6] c-bsr 4002::1 128 10
[RouterD-pim6] c-rp 4002::1 group-policy 2005
[RouterD-pim6] quit
# On Router E, configure the service scope of RP advertisements, specify a C-BSR and a C-RP, and set the
hash mask length to 128 and the priority of the C-BSR to 20.
<RouterE> system-view
[RouterE] acl ipv6 number 2005
[RouterE-acl6-basic-2005] rule permit source ff0e::101 64
[RouterE-acl6-basic-2005] quit
[RouterE] pim ipv6
[RouterE-pim6] c-bsr 1003::2 128 20
[RouterE-pim6] c-rp 1003::2 group-policy 2005
[RouterE-pim6] quit
Verify the configuration
4.
Carry out display pim ipv6 interface to view the IPv6 PIM configuration and running status on each
interface. For example:
# Verify the IPv6 PIM configuration information on Router A.
[RouterA] display pim ipv6 interface
Interface
GE1/0/1
Ser2/0/0
Pos5/0/0
To view the BSR election information and the locally configured C-RP information in effect on a router, use
display pim ipv6 bsr-info. For example:
# View the BSR information and the locally configured C-RP information in effect on Router A.
NbrCnt HelloInt
DR-Pri
0
30
1
1
30
1
30
344
DR-Address
1001::1
(local)
1
1002::2
1
1003::2

Advertisement

Table of Contents
loading

Table of Contents