Configuring Ipv6 Mbgp Route Redistribution; Configuring Ipv6 Mbgp Route Summarization; Advertising A Default Route To A Peer Or Peer Group - HP A6600 Configuration Manual

Ip multicast
Hide thumbs Also See for A6600:
Table of Contents

Advertisement

Configuring IPv6 MBGP route redistribution

To do...
1.
Enter system view.
2.
Enter BGP view.
3.
Enter IPv6 MBGP multicast
address family view.
4.
Enable default route
redistribution into the IPv6
MBGP routing table.
5.
Enable route redistribution
from another routing protocol.
If the default-route imported command is not configured, using the import-route command cannot
redistribute any IGP default route.

Configuring IPv6 MBGP route summarization

To reduce the routing table size on medium and large BGP networks, you must configure route
summarization on IPv6 MBGP routers. BGP supports only manual summarization of IPv6 multicast routes.
To do...
1.
Enter system view.
2.
Enter BGP view.
3.
Enter IPv6 MBGP address
family view.
4.
Configure manual route
summarization.

Advertising a default route to a peer or peer group

To do...
1.
Enter system view.
2.
Enter BGP view.
3.
Enter IPv6 MBGP address
family view.
4.
Advertise a default route to an
IPv6 MBGP peer or peer
group.
With the peer default-route-advertise command executed, the router sends a default route with the next
hop being itself to the specified IPv6 MBGP peer/peer group, regardless of whether the default route is
available in the routing table.
Use the command...
system-view
bgp as-number
ipv6-family multicast
default-route imported
import-route protocol [ process-id
[ med med-value | route-policy
route-policy-name ] * ]
Use the command...
system-view
bgp as-number
ipv6-family multicast
aggregate ipv6-address prefix-length [ as-set
| attribute-policy route-policy-name |
detail-suppressed | origin-policy
route-policy-name | suppress-policy
route-policy-name ]*
Use the command...
system-view
bgp as-number
ipv6-family multicast
peer { ipv6-group-name |
ipv6-address }
default-route-advertise
[ route-policy route-policy-name ]
372
Description
Optional.
By default, default route
redistribution is not allowed.
Required.
Not enabled by default.
Remarks
Required.
Not configured by
default.
Remarks
Required.
Not advertised by default.

Advertisement

Table of Contents
loading

Table of Contents