HP A6600 Configuration Manual page 52

[RouterB-igmp-snooping] quit
# Create VLAN 100, assign ports GigabitEthernet 1/0/1 through GigabitEthernet 1/0/4 to this VLAN,
and enable IGMP snooping and IGMP snooping proxying in the VLAN.
[RouterB] vlan 100
[RouterB-vlan100] port GigabitEthernet 1/0/1 to GigabitEthernet 1/0/4
[RouterB-vlan100] igmp-snooping enable
[RouterB-vlan100] igmp-snooping proxying enable
[RouterB-vlan100] quit
Verify the configuration
4.
After the configuration is completed, Host A and Host B send IGMP join messages for group 224.1.1.1.
Receiving the messages, Router B sends a join message for the group out port GigabitEthernet 1/0/1 (a
router port) to Router A.
Use display igmp-snooping group and display igmp group to display information about IGMP snooping
groups and IGMP multicast groups. For example:
# Display information about IGMP snooping groups on Router B.
[RouterB] display igmp-snooping group
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Port flags: D-Dynamic port, S-Static port, C-Copy port
Subvlan flags: R-Real VLAN, C-Copy VLAN
Vlan(id):100.
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Router port(s):total 1 port.
GE1/0/1
IP group(s):the following ip group(s) match to one mac group.
IP group address:224.1.1.1
(0.0.0.0, 224.1.1.1):
Host port(s):total 2 port.
GE1/0/3
GE1/0/4
MAC group(s):
MAC group address:0100-5e01-0101
Host port(s):total 2 port.
GE1/0/3
GE1/0/4
# Display information about IGMP multicast groups on Router A.
[RouterA] display igmp group
Total 1 IGMP Group(s).
Interface group report information of VPN-Instance: public net
Ethernet1/1(10.1.1.1):
Total 1 IGMP Group reported
Group Address
(D) ( 00:01:23 )
(D)
(D)
Last Reporter Uptime
41
Expires