Configuring Ipv6 Mbgp Route Summarization - HP A8800 Configuration Manual

Step
3. Enter IPv6 MBGP multicast
address family view.
4. Enable default route
redistribution into the IPv6
MBGP routing table.
5. Enable route redistribution
from another routing protocol.

Configuring IPv6 MBGP route summarization

To reduce the routing table size on medium and large BGP networks, you must configure route
summarization on IPv6 MBGP routers. BGP supports only manual summarization of IPv6 multicast routes.
To configure IPv6 MBGP route summarization:
Step
1. Enter system view.
2. Enter BGP view.
3. Enter IPv6 MBGP address
family view.
4. Configure manual route
summarization.
Advertising a default route to a peer or peer group
Step
1. Enter system view.
2. Enter BGP view.
3. Enter IPv6 MBGP address
family view.
Command
ipv6-family multicast
default-route imported
import-route protocol [ process-id
[ med med-value | route-policy
route-policy-name ] * ]
Command
system-view
bgp as-number
ipv6-family multicast
aggregate ipv6-address prefix-length [ as-set
| attribute-policy route-policy-name |
detail-suppressed | origin-policy
route-policy-name | suppress-policy
route-policy-name ]*
Command
system-view
bgp as-number
ipv6-family multicast
454
Description
N/A
Optional.
By default, default route
redistribution is not allowed.
Not enabled by default.
If the default-route imported
command is not configured, using
the import-route command cannot
redistribute any IGP default route.
Remarks
N/A
N/A
N/A
Not configured by
default.
Remarks
N/A
N/A
N/A