Mode Overview - Deif Multi-line 2 Designers Reference Handbook

AGC
Setup example
The following example illustrates how a specific setting is changed in the setup menu. In this
case Reverse power is the selected parameter.
G 439 440 440V
PROTECTION SETUP
SET POINT 1 SETUP
PROT1 PROT2
BACK SEL
G 439 440 440V
1010 Reverse Power
Setpoint -5.0 %
LIM DEL OA OB ENA FC
BACK SEL
first entry
No
G 439 440 440V
1011 Reverse power
-50.0 -5.0 0.0%
RESET SAVE
The unit has four different running modes and one block mode. For detailed information see
page 11.
Auto
In auto mode the unit will operate automatically, and the operator cannot initiate any sequences
manually.
Semi-auto
In semi-auto mode the operator has to initiate all sequences. This can be done via the push-
button functions, Modbus commands or digital inputs. When started in semi-automatic mode,
the gen-set will run at nominal values.
Test
DEIF A/S
G 439
1020 Over current 1
Setpoint
LIM DEL OA OB ENA FC
G 439
Yes
Enter passw.
ENTER
Increase setting
Decrease setting
moves the cursor

Mode overview

Designer's Reference Handbook
440 440V
115.0 %
440 440V
1999
INCREASE NO
DECREASE NO
Page 62 of 168