Running Modes; Running Mode Overview - Deif CGC 400 Operator's Manual

CGC 400 Operator's manual 4189340787
UK

5. Running modes

5.1 Running mode overview

The unit has four different running modes and one block mode. The different running modes are selected via
the display or the PC utility software. For detailed information please see Designer's Reference Handbook.
Auto
In auto mode, the unit will operate automatically, and the operator cannot initiate any sequences manually.
Test
The test sequence will start when the test mode is selected. The type of test is selected in parameter 7040.
Manual
Manual means that the unit will not initiate any sequences automatically, as is the case with the auto mode. It
will only initiate sequences, if external signals are given.
Block
When the block mode is selected, the unit is not able to initiate any sequences, e.g. the start sequence.
Block mode must be selected when maintenance work is carried out on the genset.
The genset will shut down if block mode is selected while the genset is running.
DEIF A/S
Running modes
Page 13 of 14