Deif Multi-line 2 Designers Reference Handbook page 112

AGC
Status text
Peak shave MANUAL
Peak shave SEMI-AUTO
Peak shave
LTO MANUAL
LTO SEMI-AUTO
LTO
MPE MANUAL
MPE SEMI-AUTO
MPE
PM MANUAL
PM SEMI-AUTO
PM
Fire pump
Display locked
GB tripped externally
MB tripped externally
TB tripped externally
Power derate
Idle run
Idle run ###.#min.
Compensation freq.
Aux. test ###V ####s
Deload
Starting DG(s) ###s
DEIF A/S
Condition
AUTO
AUTO
AUTO
AUTO
If the configurable input is
active.
If the 'Access lock' input is
activated, and the operator
tries to activate one of the
blocked keys.
This info. will be shown, if
some external equipment has
tripped the breaker.
This info. will be shown, if
some external equipment has
tripped the breaker.
This info. will be shown, if
some external equipment has
tripped the breaker.
If the 'power derate' function
is activated and the nominal
power setpoint
decreased,
appear.
If the 'Idle run' function is
active, this info. will appear to
inform the user that the gen-
set will not stop, until a timer
has expired.
If the timers in the 'Idle run'
function are active, this info.
will appear to inform the user
that the gen-set
start/stop, until a timer has
expired.
Compensation is active.
This info. is shown during a
battery test.
This info. is shown when
decreasing the load of the
gen-set.
When the
setpoint is exceeded, this info.
is shown with the countdown
of the timer.
Comment
An external trip is logged in
the event log.
An external trip is logged in
the event log.
An external trip is logged in
the event log.
has been
this info. will
will not
To inform the user that there
is a reason why the frequency
is not at the nominal setting.
start gen-set
Designer's Reference Handbook
Page 112 of 168