Remote Relay Control - Satec expertmeter EM720 Operation Manual

Chapter 6 Device Control and Upgrading

Remote Relay Control

132
To reset the accumulation counters or to clear a file:
1. Click on the corresponding button.
If a reset entry has more than one target, you are
allowed to select targets from the dialog box.
2. Check the corresponding boxes, and then click OK.
3. Confirm your command to send it to the meter.
From PAS, you can send a command to any relay in your
meter or to release a latched relay, except of the relays that
are linked to the internal pulse sources. Such relays cannot
be operated outside of the device.
EM720 Power Quality and Revenue Meter
Remote Relay Control