Access Codes
This appendix contains access codes for outside Speed Dial numbers, Exchange lines, Paging Group
and Paging Zone Codes.
H
Exchange Line Access Codes
Exchange lines are used when you dial an outside number. If your telephone does not have a
C
Line
button, you can enter the appropriate code listed in
You can also store the code on a Speed Dial (
Exchange line access code onto a Speed Dial code, enter
store code
In some systems,
users are required to dial
with LCR, you may not hear internal dial tone, depending on system programming.
See your System Administrator for the code which applies to your telephone.
Strata CT System Administrator Guide October 2000
#7001
447001
, enter
).
9
is used as a general group code or to access Least Cost Routing (LCR). System
9
in order to access an outside line. If you press
Table 5
to access an outside line.
SD
) button for one-touch access. If you are storing an
44
before the Exchange access code (e.g., to
A
CO
or
9
in a system programmed
31