YASKAWA SGD7S series Product Manual page 208

Parameter
Name
No.
Input Signal Selections
2
6
SEN (Absolute Data Request Input) Signal Allocation

n. X
/PSEL (Reference Pulse Input Multiplication Switching Input) Signal Allocation
Pn515
n.X
 
n. X Reserved parameter (Do not change.)

n.X Reserved parameter (Do not change.)
5.1 SERVOPACKs with Analog Voltage/Pulse Train References
Setting Setting
Range Unit
0000 to
–
FFFF
0 Active when CN1-40 input signal is ON (closed).
1 Active when CN1-41 input signal is ON (closed).
2 Active when CN1-42 input signal is ON (closed).
3 Active when CN1-43 input signal is ON (closed).
4 Active when CN1-44 input signal is ON (closed).
5 Active when CN1-45 input signal is ON (closed).
6 Active when CN1-46 input signal is ON (closed).
7 The signal is always active.
8 Enable when 5 V is input to CN1-4.
9 Active when CN1-40 input signal is OFF (open).
A Active when CN1-41 input signal is OFF (open).
B Active when CN1-42 input signal is OFF (open).
C Active when CN1-43 input signal is OFF (open).
D Active when CN1-44 input signal is OFF (open).
E Active when CN1-45 input signal is OFF (open).
F Active when CN1-46 input signal is OFF (open).
0 Active when CN1-40 input signal is ON (closed).
1 Active when CN1-41 input signal is ON (closed).
2 Active when CN1-42 input signal is ON (closed).
3 Active when CN1-43 input signal is ON (closed).
4 Active when CN1-44 input signal is ON (closed).
5 Active when CN1-45 input signal is ON (closed).
6 Active when CN1-46 input signal is ON (closed).
7 The signal is always enabled.
8 The signal is always inactive.
9 Active when CN1-40 input signal is OFF (open).
A Active when CN1-41 input signal is OFF (open).
B Active when CN1-42 input signal is OFF (open).
C Active when CN1-43 input signal is OFF (open).
D Active when CN1-44 input signal is OFF (open).
E Active when CN1-45 input signal is OFF (open).
F Active when CN1-46 input signal is OFF (open).
5.1.2 List of Parameters
Continued from previous page.
Default Applicable When
Setting Motors Enabled
After
8888 All
restart
Continued on next page.
Classi- Refer-
fication ence
*1
Setup
5
5-31