Ocsp Parameters - AudioCodes Mediant 4000 SBC User Manual

Parameter
IDS Policy Table
IDS Policy Table
[IDSPolicy]
IDS Rule Table
IDS Rule Table
[IDSRule]
IDS Match Table
IDS Match Table
[IDSMatch]

55.5.7 OCSP Parameters

The Online Certificate Status Protocol (OCSP) parameters are described in the table
below.
Parameter
Enable OCSP Server
configure network > ocsp >
enable
[OCSPEnable]
User's Manual
value. For example, if IDSAlarmClearPeriod is set to 20 sec and the
Threshold Window is set to 15 sec, the IDSAlarmClearPeriod parameter
is ignored and the alarm is cleared only after 30 seconds (2 x 15 sec).
The valid value is 0 to 86400. The default is 300.
Defines IDS Policies.
The format of the ini file parameter is:
[ IDSPolicy ]
FORMAT IDSPolicy_Index = IDSPolicy_Name, IDSPolicy_Description;
[ \IDSPolicy ]
For a detailed description of the table, see ''Configuring IDS Policies'' on
page 162.
Defines rules for IDS Policies.
The format of the ini file parameter is:
[ IDSRule ]
FORMAT IDSRule_Index = IDSRule_Policy, IDSRule_RuleID,
IDSRule_Reason, IDSRule_ThresholdScope,
IDSRule_ThresholdWindow, IDSRule_MinorAlarmThreshold,
IDSRule_MajorAlarmThreshold, IDSRule_CriticalAlarmThreshold,
IDSRule_DenyThreshold, IDSRule_DenyPeriod;
[ \IDSRule ]
For a detailed description of the table, see ''Configuring IDS Policies'' on
page 162.
Defines target rules per IDS Policy.
The format of the ini file parameter is:
[ IDSMatch ]
FORMAT IDSMatch_Index = IDSMatch_SIPInterface,
IDSMatch_ProxySet, IDSMatch_Subnet, IDSMatch_Policy;
[ \IDSMatch ]
For a detailed description of the table, see ''Assigning IDS Policies'' on
page 166.
Table 55-28: OCSP Parameters
Enables or disables certificate checking using OCSP.

[0] Disable (default)

[1] Enable
For a description of OCSP, see Configuring Certificate Revocation
Checking (OCSP).
758
Description
Description
Document #: LTRT-41729
Mediant 4000 SBC