Ocsp Parameters - AudioCodes Mediant 800B User Manual

Parameter
IDS Rule Table
[IDSRule]
IDS Match Table
IDS Match Table
[IDSMatch]

72.5.7 OCSP Parameters

The Online Certificate Status Protocol (OCSP) parameters are described in the table
below.
Parameter
Enable OCSP Server
configure network > ocsp >
enable
[OCSPEnable]
Primary Server IP
configure network > ocsp >
server-ip
[OCSPServerIP]
Secondary Server IP
configure network > ocsp >
secondary-server-ip
[OCSPSecondaryServerIP]
Server Port
configure network > ocsp >
server-port
[OCSPServerPort]
Default Response When
Server Unreachable
User's Manual
Defines rules for IDS Policies.
The format of the ini file parameter is:
[ IDSRule ]
FORMAT IDSRule_Index = IDSRule_Policy, IDSRule_RuleID,
IDSRule_Reason, IDSRule_ThresholdScope,
IDSRule_ThresholdWindow, IDSRule_MinorAlarmThreshold,
IDSRule_MajorAlarmThreshold, IDSRule_CriticalAlarmThreshold,
IDSRule_DenyThreshold, IDSRule_DenyPeriod;
[ \IDSRule ]
For more information, see 'Configuring IDS Policies' on page 182.
Defines target rules per IDS Policy.
The format of the ini file parameter is:
[ IDSMatch ]
FORMAT IDSMatch_Index = IDSMatch_SIPInterface,
IDSMatch_ProxySet, IDSMatch_Subnet, IDSMatch_Policy;
[ \IDSMatch ]
For more information, see 'Assigning IDS Policies' on page 186.
Table 72-30: OCSP Parameters
Enables or disables certificate checking using OCSP.

[0] Disable (default)

[1] Enable
For a description of OCSP, see Configuring Certificate Revocation
Checking (OCSP).
Defines the IP address of the OCSP server.
The default IP address is 0.0.0.0.
Defines the IP address (in dotted-decimal notation) of the secondary
OCSP server (optional).
The default IP address is 0.0.0.0.
Defines the OCSP server's TCP port number.
The default port number is 2560.
Determines whether the device allows or rejects peer certificates
when the OCSP server cannot be contacted.
1104
Mediant 800B Gateway & E-SBC
Description
Description
Document #: LTRT-10632