Ocsp Parameters; A.4.7 Ocsp Parameters - AudioCodes Mediant 1000 User Manual

SIP User's Manual
Parameter
A.4.7

OCSP Parameters

The Online Certificate Status Protocol (OCSP) parameters are described in the table
below.
Parameter
Web: Enable OCSP Server
EMS: OCSP Enable
[OCSPEnable]
Web: Primary Server IP
EMS: OCSP Server IP
[OCSPServerIP]
Web: Secondary Server IP
[OCSPSecondaryServerIP]
Web: Server Port
EMS: OCSP Server Port
[OCSPServerPort]
Web: Default Response
When Server Unreachable
EMS: OCSP Default
Response
[OCSPDefaultResponse]
Version 6.4
[ IPsecProposalTable ]
FORMAT IPsecProposalTable_Index =
IPsecProposalTable_EncryptionAlgorithm,
IPsecProposalTable_AuthenticationAlgorithm,
IPsecProposalTable_DHGroup;
[ \IPsecProposalTable ]
For example:
IPsecProposalTable 0 = 3, 2, 1;
IPsecProposalTable 1 = 2, 2, 1;
In the example above, two proposals are defined:

Proposal 0: AES, SHA1, DH group 2

Proposal 1: 3DES, SHA1, DH group 2
Notes:

Each row in the table refers to a different IKE peer.

To support more than one Encryption / Authentication / DH Group
proposal, for each proposal specify the relevant parameters in the
Format line.

The proposal list must be contiguous.

For a detailed description of this table and to configure the table using
the Web interface, see 'Configuring IP Security Proposal Table' on
page 135.

For configuring ini file table parameters, see 'Configuring ini File Table
Parameters' on page 84.
Table A-25: OCSP Parameters
Enables or disables certificate checking using OCSP.

[0] Disable (default).

[1] Enable.
For a description of OCSP, refer to the Product Reference Manual.
Defines the IP address of the OCSP server.
The default IP address is 0.0.0.0.
Defines the IP address (in dotted-decimal notation) of the secondary
OCSP server (optional).
The default IP address is 0.0.0.0.
Defines the OCSP server's TCP port number.
The default port number is 2560.
Determines the default OCSP behavior when the server cannot be
contacted.

[0] Disable = Rejects peer certificate (default).

[1] Enable = Allows peer certificate.
577
A. Configuration Parameters Reference
Description
Description
March 2012