Configuring Additional Dhcp Options - AudioCodes Mediant 800B User Manual

User's Manual
Parameter
Vendor Class Identifier
vendor-class
[DhcpVendorClass_VendorClassId]

15.1.3 Configuring Additional DHCP Options

The DHCP Option table lets you configure up to 10 additional DHCP Options that the
DHCP server can use to service the DHCP client. These DHCP Options are included in the
DHCPOffer response sent by the DHCP server.
The following procedure describes how to configure DHCP Options through the Web
interface. You can also configure it through ini file (DhcpOption) or CLI (configure network
> dhcp-server option).
Note:
default ones, which are configured in the DHCP Servers table. In other words, if you
configure Option 67 in the DHCP Option table, the device uses the value configured
in the DHCP Option table instead of the value configured in the DHCP Servers table.

To configure DHCP Options:
1. Open the DHCP Servers table (see 'Configuring the DHCP Server' on page 227).
2. Select the row of the desired DHCP server for which you want to configure additional
DHCP Options, and then click the DHCP Option link located below the table; the
DHCP Option table opens.
3. Click New; the following dialog box appears:
4. Configure additional DHCP Options for the DHCP server according to the parameters
described in the table below.
5. Click Apply.
Version 7.2
Defines the value of the VCI DHCP Option 60.
The valid value is a string of up to 80 characters. By default,
no value is defined.
The additional DHCP Options configured in the DHCP Option table override the
Figure 15-3: DHCP Option Table - Add Dialog Box
Description
233 Mediant 800B Gateway & E-SBC
15. Services