Procedure For Turning On The Power - Panasonic FP? Positioning Unit RTEX Technical Manual

4.3 P rocedure for Turning On the Power
2 9 B
When turning on the power to the system incorporating the positioning unit RTEX, the nature and
statuses of any external devices connected to the system should be taken into consideration, and
sufficient care should be taken that turning on the power does not initiate unexpected movements or
operations.

4.3.1 Procedure for Turning On the Power

Procedure
1. Turn on the power supplies for input and output devices connected to the PLC.
2. Turn on the power supply for the AMP.
3. Turn on the power supply for the PLC.
4-4