Table of Contents
Advertisement
7.8
P arameter Settings
4 1 B
Set the initial operation for the positioning unit RTEX.
1. Select [Set axis] → [Parameter settings] in the menu bar, or click the [Parameter setting] icon
in the toolbar.
2. The parameter setting dialog is shown. Set the parameters.
Setting items
Parameter name
Unit setting
Pulse number per rotation
Movement amount per rotation
CW/CCW direction setting
Limit switch
Limit switch connection
Software limit (Positioning control)
Software limit (Home return)
Software limit (JOG operation)
Upper limit of software limit
Lower limit of software limit
Auxiliary output mode
Auxiliary output ON time (ms)
7-20
Description
The unit to be used for setting each axis.
The pulse number per rotation.
(It should be cancelled down with the movement amount per
rotation.)
The movement amount per rotation.
(It should be cancelled down with the pulse number per
rotation.)
The directions of CW and CCW.
CW+: + direction is CW.
CCW+: + direction is CCW.
Enable/disable the limit switch.
The connections of the + direction limit switch and - direction
limit switch.
Standard: + direction limit is CWL. - direction limit is CCWL.
Reverse connection: + direction limit is CCWL. - direction limit
is CWL.
Enable/disable the software limit in the positioning control.
Enable/disable the software limit in the home return.
Enable/disable the software limit in the JOG operation.
The upper limit value of the software limit.
The lower limit value of the software limit.
Enable/disable the auxiliary output contact and auxiliary output
code.
The time that the auxiliary output contact is ON.
Advertisement
Table of Contents
