Node Drive Carrier Indicators - Quantum DXi6900 User Manual

Chapter 2: Basic Operations
DXi6900 Node
PCI Slot 4
2 x 16 Gb Fibre Channel
2 x 10 Gb Ethernet *
2 x 10 Gb Ethernet *
2 x 10 Gb Ethernet *
2 x 10 Gb Ethernet *
2 x 10 Gb Ethernet *
2 x 10 Gb Ethernet *
* 2 x 10 Gb Ethernet = 2 x 10 GbE (SFP+) or 2 x 10 GBase-T Ethernet ports

Node Drive Carrier Indicators

Each DXi6900 hard drive carrier in the Node module has two LED indicators (see
page):
LED Indicator
Drive activity indicator (green)
Drive status indicator (green and amber)
Quantum DXi6900 User's Guide
PCI Slot 5
2 x 16 Gb Fibre Channel
2 x 16 Gb Fibre Channel
2 x 10 Gb Ethernet *
2 x 16 Gb Fibre Channel
2 x 16 Gb Fibre Channel
2 x 16 Gb Fibre Channel
Activity
Flashing - Indicates hard disk drive activity.
l
Off - Drive ready for insertion or removal
l
Blinks green two times per second - Identify
l
drive/preparing for removal
Blinks green, amber, and off - Drive predicted
l
failure
Blinks amber four times per second - Drive failed
l
Blinks green slowly - Drive rebuilding
l
Steady green - Drive online
l
Blinks green three seconds, amber three
l
seconds, and off six seconds - Rebuild aborted
PCI Slot 7
2 x 16 Gb Fibre Channel
2 x 16 Gb Fibre Channel
2 x 10 Gb Ethernet *
2 x 10 Gb Ethernet *
2 x 16 Gb Fibre Channel
2 x 10 Gb Ethernet *
Figure 21 on the next
Note: The drive status indicator remains off until
all drives are initialized after system power is
applied. Drives are not ready for insertion or
removal during this time.
50