Quantum DXi6900 User Manual page 257

Chapter 9: Configuration
OST Configuration
Automatic Image
Replication
Active Connections
Backup Images
Description
Additional Information
Click a column heading to sort the rows in the table by that column. Click the column heading again to
l
reverse the sort order.
The connections of a storage server that are used equals the data streams plus one for each LSU
l
polling. A backup job may generate more than one data stream if the data can be read in parallel. For
example, a policy that is backing up A, B, C, and D drives of a Windows system can generate four data
streams in parallel.
Adding an LSU
Add an LSU to a storage server to present the storage capacity of the DXi6900 as an LSU that is compatible
with backup applications that support OST. You can add an LSU with a specific capacity, or you can add an
LSU that uses the available capacity of the DXi6900.
Note: You must create a storage server before you can add an LSU (see
page 251).
To add an LSU to a storage server:
1. Click Add.
The Add Logical Storage Unit page displays (see
Quantum DXi6900 User's Guide
The status of Automatic Image Replication (AIR) for the LSU (Enabled or
Disabled), as well as the configured targets (if any).
Note: To view details about the remote LSU if AIR is enabled, use the Edit
Logical Storage Unit page (see
The number of currently active connections to the LSU.
The number of backup images on the LSU.
A brief description of the LSU (if available).
Editing an LSU on page
Adding a Storage Server on
on the next page).
259).
257