Turning Off The Dxi6900; Locating Dxi6900 Serial Numbers - Quantum DXi6900 User Manual

Chapter 2: Basic Operations

Locating DXi6900 Serial Numbers

Figure 32: Powering on the DXi6900 Node
1
1. Power Switch

Turning Off the DXi6900

Before shutting down the DXi6900, make sure that all backup and replication jobs are finished, and that
space reclamation activity is complete.
1. Shut down the system from the remote management console using the Shutdown option on the
Utilities > Reboot & Shutdown page.
Note: Shutting down the system can take up to 15 minutes. Only the Node will completely shut
down.
2. After the Node shuts down, turn off both power switches on the back of each Array module (RBOD).
Wait until the seven segment display on the rear of the module turns off.
3. Turn off both power switches on the back of each Expansion module (EBOD).
Locating DXi6900 Serial Numbers
You will need the system serial number, the Node serial number, and the Expansion module serial number
at various times:
System Serial Number
Node Serial Number
Expansion Module (RBOD) Serial Number
You can locate the system serial number on the Home page of the remote management console.
You can also locate the system serial number, the Node serial number, and the Array and Expansion
module serial numbers by looking at the physical components.
Quantum DXi6900 User's Guide
You need this number to contact Quantum Support or to
add a licensed feature.
You need this number for a Node replacement component.
You need this number for an Expansion module
replacement component.
62