Chapter 2: Basic Operations
DXi6900 Node
Note: If a drive fails, you will be notified by a service ticket in the remote management console (see
Service Tickets on page
Caution: Do not remove a drive that has not failed. Instead, only remove a drive that has failed. If you
accidentally remove a good drive, wait 30 seconds before reinserting the drive.
Figure 21: DXi6900 Hard Drive Carrier LEDs
1 - Drive activity indicator (green) 2 - Drive status indicator (green and amber)
DXi6900 Node 1 GbE Ethernet
Each 1 GbE Ethernet port on the DXi6900 Node rear panel has two LED indicators (see
Link indicator
Activity Indicator
Figure 22: DXi6900 Node - 1 GbE Ethernet Port LEDs
1 - Link Indicator 2 - Activity Indicator
Quantum DXi6900 User's Guide
197).
Off - Indicates the port is not connected to the network.
l
Green - Indicates the port is connected to the network at maximum speed (1Gbps).
l
Amber - Indicates the port is connected to the network at less than its maximum port
l
speed.
Blinking green - Indicates network data is being sent or received.
Figure 22
below):
51