Quantum DXi6900 User Manual page 110

Chapter 4: Configuration Wizards
Email Alerts Wizard
Note: To use hostname format, you must specify at least one DNS IP address on the Network
page (see Network on page
2. In the From Email Address box, enter the return e-mail address displayed in e-mails sent by the
DXi6900.
3. Specify a return address that lets you easily identify the system that generated the e-mail (for example,
systemname@any-domain.com). The return address must contain an @ symbol and a valid domain
name, including a period.
4. (Optional) Select the Enable Admin Alerts about Email Server not configured check box to have
system generate administration alerts to notify you if an e-mail server is not configured.
5. (Recommended) Select the Enable automatic emails to Quantum check box to periodically send
system configuration and status information to Quantum, including any software upgrades you have
installed using the Software Upgrade Utility. Quantum Support can use this information to provide a
better support experience in the future.
Note: Automatic e-mails contain configuration and status information only, and do not contain any
customer data stored on the system.
6. Click Next to continue.
Figure 70: Email Alerts Wizard: Server
Step 3: Recipients
1. Click Add to add an e-mail recipient.
2. Under Add Email Recipient, enter information about the recipient (see
Quantum DXi6900 User's Guide
305).
Figure 71 on page 112):
110