Quantum DXi6900 User Manual page 179

Chapter 7: Status
Performance
Figure 113: Ethernet Page
Use the Ethernet page to display recent network activity in dynamic graphs:
The top graph reports data received and the bottom graph reports data sent.
l
Select the port to monitor in the Ethernet drop-down box, or select Avg to display an average of all ports.
l
The horizontal axis displays time (0–100 seconds).
l
The vertical axis displays data throughput (0–125 MB/s for 1 GbE ports or 0–1.25 GB/s for 10 GbE ports).
l
Values that exceed the maximum value of the vertical axis are shown in lighter green.
l
Each bar on the graph represents approximately 1 second of time.
l
Hold the cursor over a bar to display the value of the bar.
l
RAID
The RAID page allows you to view throughput performance for RAID read and write activity.
To access the RAID page, on the Performance page, click the RAID tab (see
page).
Quantum DXi6900 User's Guide
Figure 114 on the next
179