Quantum DXi6900 User Manual page 43

Chapter 2: Basic Operations
DXi6900 Node
Figure 18: DXi6900-S Node Front View
1
8
Table 1: DXi6900 Node - Front Panel LED Indicators, Buttons, and Connectors
Item Indicator, Button, or
Connector
1 Power-on indicator, power
button.
2 System identification
button
Quantum DXi6900 User's Guide
2 3 4 5 6
9 10
Icon Description
The power-on indicator lights when the system power is on. The
power button controls the power supply output to the system.
Press to toggle the system ID on and off. The identification
buttons on the front and rear panels can be used to locate a
particular system within a rack. When one of these buttons is
pressed, the system status indicator on the rear flashes until one
of the buttons is pressed again.
WARNING: Turning off the power removes the main power
but keeps standby power supplied to the Node. Because of
this, you must unplug the Node before servicing.
Caution: Turning off the power without properly shutting
down the system may result in loss of data (see
and Shutting Down the DXi6900 on page
Note: To shut down the Node in the event of an emergency,
press and hold the power button for 4 seconds. Warning:
This may result in data loss and may cause a delay on next
startup due to a blockpool verify operation.
7
Turning On
60).
43