Quantum DXi6900 User Manual page 292

Chapter 9: Configuration
Notifications
Figure 179: Server Page
To specify the outgoing e-mail server:
1. In the Hostname or IP Address box, enter the hostname or IP address of the outgoing e-mail server.
Additional Information
When entering IP addresses, never use an address that is in a reserved IP address range. To
l
see a list of reserved IP address ranges, click the quick tip icon [?] located near the IP address
field.
To use hostname format, you must specify at least one DNS IP address on the Network page
l
(see Network on page
2. In the From Email Address box, enter the return e-mail address displayed in e-mails sent by the
DXi6900.
Specify a return address that lets you easily identify the system that generated the e-mail (for example,
systemname@any-domain.com). The return address must contain an @ symbol and a valid domain
name, including a period.
3. (Optional) Select the Enable Admin Alerts about Email Server not configured check box to have
system generate administration alerts to notify you if an e-mail server is not configured.
4. (Recommended) Select the Enable automatic emails to Quantum check box to periodically send
system configuration and status information to Quantum, including any software upgrades you have
installed using the Software Upgrade Utility. Quantum Support can use this information to provide a
better support experience in the future.
Note: Automatic e-mails contain configuration and status information only, and do not contain any
customer data stored on the system.
5. Click Apply.
Quantum DXi6900 User's Guide
305).
292