Quantum DXi6900 User Manual page 334

Chapter 9: Configuration
System
Monitor Group
Admin Group
4. (Recommended) Test the LDAP/AD settings before applying the settings to the DXi system (see
LDAP/AD Settings on the next
5. (Recommended) Test LDAP/AD usernames and passwords before applying the LDAP/AD settings to
the DXi system (see
6. Click Apply. Changes to LDAP/AD settings forces a log out of the DXi system. Click Yes to continue.
Figure 210: LDAP/AD Change Confirmation
Disable LDAP/AD
De-select the Enable LDAP/AD check box to disable LDAP/AD on the DXi6900 system. The LDAP/AD
settings remain saved.
Quantum DXi6900 User's Guide
Enter a distinguished name or common name for the monitor users
allowed on the DXi system. One one group (Monitor or Admin) is required
for LDAP/AD configuration.
Example - cn=user,ou=Group,dc=mycompany,dc=com
Note: OpenLDAP servers require the
to be installed on the server. Refer to
mta.org/htmlman5/slapo-memberof.5.html
the overlay.
Enter a distinguished name or common name for the admin users allowed
on the DXi system. One one group (Monitor or Admin) is required for
LDAP/AD configuration.
Example - cn=sysadmin,ou=Group,dc=mycompany,dc=com
Note: OpenLDAP servers require the
to be installed on the server. Refer to
mta.org/htmlman5/slapo-memberof.5.html
the overlay.
page).
Test LDAP/AD User on the next
Slapo-MemberOf
http://manpages.courier-
Slapo-MemberOf
http://manpages.courier-
page).
overlay
for more information on
overlay
for more information on
Test
334