Chapter 9: Configuration
System
Note: You can select multiple communities to delete at once
Test
The SNMP Test page allows you to send a test SNMP trap to verify that SNMP is correctly configured on
the DXi6900.
To access the SNMP Test page, on the SNMP page, click the Test tab (see
Figure 189: SNMP Test Page
To send a test SNMP trap, select a destination in the list and click Send. If the destination does not receive
the SNMP trap, make sure that the destination IP address is correct (see
298). Also make sure that the community information is correct (see
System
To access the System page, click the Configuration menu, and then click the System tab.
The System page contains the following tabs:
Network on the next page
l
Date & Time on page 316
l
Security on page 318
l
Manage Users on page 346
l
FC Initiators and Targets on page 351
l
Client Plug-Ins on page 349
l
Quantum DXi6900 User's Guide
Figure 189
below).
Editing a Destination on page
Community on page
299).
304