Quantum DXi6900 User Manual page 296

Chapter 9: Configuration
Notifications
Figure 183: Destinations Page
Tasks
Use the Destinations page to perform the following tasks:
View information about SNMP destinations (see
l
Add an SNMP destination (see
l
Edit an SNMP destination (see
l
Delete an SNMP destination (see
l
Trap Destination List
The Trap Destination List displays the following information about SNMP destinations:
IP Address
Name
Selected Traps
Adding a Destination
Add an SNMP destination to send traps from the DXi6900 to the destination.
Note: You can add up to 5 destinations.
To add a destination:
1. Click Add.
The Add Trap Destination page displays (see
Quantum DXi6900 User's Guide
Adding a Destination
Editing a Destination on page
Deleting a Destination on page
The IP address of the destination.
The name of the destination.
The traps the DXi6900 sends to the destination (Failure, Warning, Informational,
Available, or Unavailable).
Trap Destination List below).
below).
298).
299).
Figure 184 on the next page).
296