Quantum DXi6900 User Manual page 269

Chapter 9: Configuration
Replication Configuration
Figure 167: Replication Configuration Page
Tasks
Use the Replication Configuration page to perform the following tasks:
View information about configured replication target systems (see
l
Add, edit, or delete a replication target (see
l
Replication Target on page
Pause or resume replication to a target (see
l
273).
Configure a constant replication throttle (see
l
View information about allowed replication source systems (see
l
Add or delete an allowed replication source (see
l
Deleting a Replication Source on page
Specify the maximum number of received snapshots to retain for each source (see
l
Maximum Number of Snapshots on page
Target DXis List
The Target DXis list displays the following information for each target DXi:
Target
Status
Source IP
Quantum DXi6900 User's Guide
Adding a Replication Target on the next page,Editing a
272, or Deleting a Replication Target on page
Pausing or Resuming Replication to a Target on page
Enabling System Throttling on page
276).
276).
The IP address of the target system that the DXi6900 is configured to send data to.
The replication status of the DXi6900. For a detailed description of all possible
replication statuses, see
The IP address that is used to uniquely identify the source DXi to the target.
Target DXis List
Source DXis List on page
Adding a Replication Source on page 275
Replication Overview on page
below).
273).
274).
275).
or
Changing the
124.
269