Quantum DXi6900 User Manual page 298

Chapter 9: Configuration
Notifications
Editing a Destination
Edit an SNMP destination to change the name of the destination or the types of traps the DXi6900 sends to
the destination.
To edit a destination:
1. Click Edit.
The Edit Trap Destination page displays (see
Figure 185: Edit Trap Destination Page
2. Enter information about the destination:
Note: If you are editing a destination, you cannot change the IP Address.
IP Address
Name
Quantum DXi6900 User's Guide
Figure 185
(Optional) Select a different destination to edit.
Enter the name of the destination.
below).
298