Quantum DXi6900 User Manual page 326

Chapter 9: Configuration
System
Additional Information
Passwords can be up to 32 characters. Alphanumeric characters and special characters are
l
allowed.
For accounts enabled with both SSH and password authentication, the DXi system will first
l
attempt SSH authentication . If there are no keys defined or no client key matches, the DXi
system will fall back to password authentication.
4. Click Apply.
Enabling GUI Service Account
Use the GUI password when logging onto the remote management console as a service account (see
Accessing Remote Management on page
To enable or disable the GUI service account:
1. Under GUI Service do one of the following steps:
Select the Enable account check box to enable the GUI service account.
l
Clear the Enable account check box to disable the GUI service account.
l
2. Enter the following information:
New Password
Confirm New Password
Additional Information
Passwords can be up to 32 characters. Alphanumeric characters and special characters are
l
allowed.
3. Click Apply.
Enabling SSH/CLI Service Account
The SSH service account provides SSH remote access to the DXi6900 system.
1. Under SSH Service, do one of the following steps:
Select the Enable account check box to enable SSH service account
l
Clear the Enable account check box to disable the SSH service account
l
2. The SSH service account may be configured with Secure Shell (SSH) key-based authentication.
Add an SSH Public Key
Quantum DXi6900 User's Guide
65).
Enter the new password.
Enter the new password again to confirm it.
326