Quantum DXi6900 User Manual page 321

Chapter 9: Configuration
System
Enable or disable SSH access for the service account
l
326)
Changing GUI Administrator Password
Use the GUI password when logging onto the remote management console as an administrator (see
Accessing Remote Management on page
1. Under GUI Administrator enter the following information:
Old Password
New Password
Confirm New Password
Additional Information
Passwords can be up to 32 characters. Alphanumeric characters and special characters are
l
allowed.
Loss of this password will require Quantum service support.
l
2. Click Apply.
Enabling GUI Monitor Account
Use the GUI password when logging onto the remote management console as a monitor (see
Remote Management on page
1. Under GUI Monitor do one of the following steps:
Select the Enable account check box to enable the GUI monitor account.
l
Clear the Enable account check box to disable the GUI monitor account.
l
2. Enter the following information:
New Password
Confirm New Password
Additional Information
Passwords can be up to 32 characters. Alphanumeric characters and special characters are
Quantum DXi6900 User's Guide
65).
Enter the old password.
Enter the new password.
Enter the new password again to confirm it.
65).
Enter the new password.
Enter the new password again to confirm it.
(Enabling SSH/CLI Service Account on page
Accessing
321