Quantum DXi6900 User Manual page 300

Chapter 9: Configuration
Notifications
Use the Community page to perform the following tasks:
View information about SNMP communities (see
l
Add an SNMP community (see
l
Edit an SNMP community (see
l
Delete an SNMP community (see
l
SNMP Community List
The SNMP Community List displays the following information about SNMP communities:
Name
IP Address
Network Mask
Access Type
Community Status
Adding a Community
Add an SNMP community to include the DXi6900 in a group of devices that are monitored by a common
management station.
Note: If no communities are defined, the SNMP agent is not accessible.
To add a community:
1. Click Add.
The Add SNMP Community page displays (see
Quantum DXi6900 User's Guide
Adding a Community
Editing a Community on page
Deleting a Community on page
The name of the community.
The IP address of the community.
The network mask of the community.
The access type of the community (Get or Get/Set).
The status of the community (Enabled or Disabled).
SNMP Community List
below).
302).
303).
Figure 187 on the next
below).
page).
300