Quantum DXi6900 User Manual page 265

Chapter 9: Configuration
OST Configuration
Additional Information
You must add target IP mapping information if you are performing optimized duplication on a
l
segmented network and replication is not configured between the source DXi and target DXi.
Quantum does not recommend mapping multiple data IP addresses to a single replication IP address.
l
If you have mapped multiple data IP addresses and the routing is not working, try removing the
additional data IP addresses, and map only a single data IP address.
To switch from using the replication channel to the OST channel for optimized duplication, replication
l
must be unconfigured.
To access the Target IP Mapping page, on the OST page, click the Target IP Mapping tab (see
163 below).
Figure 163: Target IP Mapping Page
Tasks
Use the Target IP Mapping page to perform the following tasks:
View information about mapped data and replication IP addresses (see
l
next page).
Map a target data IP address to a replication IP address (see
l
next page).
Edit the mapping for a target data IP address (see
l
Delete the mapping for a target data IP address (see
l
Quantum DXi6900 User's Guide
Target IP Mapping List on the
Mapping a Target IP Address on the
Editing a Mapped IP Address on the next
Editing a Mapped IP Address on the next
Figure
page).
page).
265