Chapter 9: Configuration
System
Figure 208: Delete Public Key Page
c. Click Yes.
The "Successfully performed Security action" message appears.
d. Click OK.
The key is removed from the Available SSH Public Keys table.
3. In addition to configuring SSH authentication, the SSH service account may also be configured with
password authentication.
Select the Allow login with password check box to enable a password on a CLI administrator or
l
CLI viewer account
Clear the Allow login with password check box to disable a password on a CLI administrator or
l
CLI viewer account
Enter the following information:
New Password
Confirm New Password
Additional Information
Passwords can be up to 20 characters. Alphanumeric characters and special characters are
l
allowed.
For accounts enabled with both SSH and password authentication, the DXi system will first
l
attempt SSH authentication . If there are no keys defined or no client key matches, the DXi
system will fall back to password authentication.
4. Click Apply.
LDAP/AD
The LDAP/AD page allows the DXi6900 system to connect to a Lightweight Directory Access Protocol
(LDAP) or Active Directory (AD) server.
Quantum DXi6900 User's Guide
Enter the new password.
Enter the new password again to confirm it.
330