Quantum DXi6900 User Manual page 94

Chapter 4: Configuration Wizards
OST Wizard
Step 3: Add LSUs
1. Enter information about the LSU (see
LSU Information
Storage Server
Use Available Capacity
Specify Capacity
2. Click Add.
The LSU displays in the LSUs Added table.
3. (Optional) To add additional LSUs, repeat Steps 1–2.
To remove an LSU, select it in the LSUs Added table and click Delete.
4. Click Next to continue.
Note: To configure the LSU for Automatic Image Replication, use the Configuration > OST > LSU
page (see LSU on page
Quantum DXi6900 User's Guide
Figure 55 on the next
Description
Select the storage server that will contain the new LSU.
Select this option to add an LSU that uses the available capacity on the
system.
You cannot add an available capacity LSU to a storage server that
already contains an LSU. Also, if you add an available capacity LSU to a
storage server, you cannot add additional LSUs to that same storage
server.
Note: After you add an LSU that uses the Available Capacity
option, you cannot change the LSU to use the Specific Capacity
option. Instead, you must delete the LSU, then add a new LSU and
choose the Specific Capacity option (see
261).
Select this option to specify the physical capacity of the LSU, and then
enter the following information.
LSU Name - Enter the name of the LSU.
l
Physical Capacity - Enter the physical capacity of the LSU (1 to
l
1048576 GB).
255).
page).
Deleting an LSU on page
94