Table of Contents
Advertisement
Chapter 1: Preface
Tape Drive AC Grounding Inspection
Tape Drive AC Grounding Inspection
Figure 1 AC grounding
diagram (50 Hz and 60 Hz)
4
7 Check the cover of the tape drive for sharp edges, damage, or
alterations that expose its internal parts.
8 Check the cover of the tape drive for proper fit. It should be in place
and secure.
9 Check the product label on the tape drive to make sure that it
matches the voltage at your outlet.
1 Power off the drive.
2 Disconnect all cables.
3 See
Figure 1
on page 4 which is provided for reference only.
Disconnect the power cord from its source.
4 Inspect the power cable for visible cracks, wear, or damage.
Quantum LTO-5 HH SAS Model C User's Guide
Advertisement
Table of Contents
