Quantum DXi6900 User Manual page 250

Chapter 9: Configuration
OST Configuration
Edit properties for an existing storage server (see
l
Delete a storage server from the system (see Deleting_Storage_Server).
l
Storage Server List
The Storage Server List displays the following information for all storage servers on the DXi6900:
Storage Servers
Maximum Storage Servers
LSUs
OST Service
Name
LSUs
Max Connections
Active Connections
Backup Images
Concurrent Optimized Duplication
Description
Additional Information
Click a column heading to sort the rows in the table by that column. Click the column heading again to
l
reverse the sort order.
The connections of a storage server that are used equals the data streams plus one for each LSU
l
polling. A backup job may generate more than one data stream if the data can be read in parallel. For
example, a policy that is backing up A, B, C, and D drives of a Windows system can generate four data
streams in parallel.
Quantum DXi6900 User's Guide
Editing a Storage Server on page
The number of storage servers that have been added to the
system.
The maximum number of storage servers that can be added to the
system.
The number of logical storage units (LSUs) that have been added to
the system (see LSU on page
The status of the OST service. OST settings can be configured in
Ready, Stopped, or Verifying state. The OST server is available
for backup only in Ready state.
The name of the storage server.
The number of LSUs that have been added to the storage server.
The maximum number of connections allowed to the storage
server.
The number of currently active connections to the storage server.
The number of backup images on the storage server.
The status of Concurrent Optimized Duplication for the storage
server (Enabled or Disabled), as well as the configured targets (if
any).
A brief description of the storage server (if available).
253).
255).
250